Hi Crafty Friends, Before we begin, I would like to say a very special thank you to Delphine for her amazing artwork this month. You can check out her other project here.  Hugs, Joanna

Hi all!
It is with great pleasure that I find you today to share with you my second creation
I wanted to keep a common thread, and I kept the theme of the Frame, this time adapted to a card, With its matching case.

Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card

once again, I had a lot of fun, and I varied the pleasures using several sets of stamps
such as : Build A Snowman, Sugar & Spice and Winter Friends
Together with Nestie Dies and Ribbon and Trim
Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Without further ado, a photo tutorial to explain the procedure
Let’s start with the card
Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Take a 12×12″ white cardstock
Mark folds at 1″; 1 1/2″; 2 1/2″ and 3″
On the 4 sides of the cardstock
Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut the 4 corners as shown in the picture above
Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
A more detailed view of how the corners should be cut
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
to fold,
And put double-sided tape
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas cardInspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
The little tip to be sure to stick straight, and have no difficulty at the time of assembly:
Glue the sides flat
Starting with the sides straight cut

Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card

Now, it only remains to raise the sides
So as to form the frame
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
To decorate the outline of the frame:
Cut 4 strips of pattern paper of: 5 3/4 “x 3/4”
Then cut the corners at a 45 ° angle
So as to form a square
then stick
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut a piece of kraft cardstock 4 x 4 “
stick in the background of the frame
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
cut a piece of white cardstock of : 3 3/4″ x 3 3/4″
a 2 and a 5 with “Cargo Stencil Number Set” of Tim Holtz Alterations Movers & Shapers in dark red carstock
stamp sentiments with light brown of : “Sugar & Spice” stamps set
glue the : 25 in the middle with 3D foam squares
glue by centering on the kraft cardstock
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut a paper rosette with tim holtz alterations sizzlits die
Glue with hot glue gun
add doily creased under the rosette
For pennants:
Cut out banners with: “Fancy Label Dies 3”
Cut to different sizes
Glue under the rosette
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
add a big christmas brad in the middle of the rosette
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Let’s go to the card on the back of the frame:
Cut a 12 “x 6” white cardstock
Fold to: 6 “
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut a 5 3/4 “x 5 3/4” kraft cardstock
And a 5 1/2 “x 5 1/2”
glue
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
With the die oval
From “Fancy Label Dies 3”
Cut and emboss a white cardstock oval
For mat this one with a slightly larger oval:
Draw the edges of the die on a pattern paper
Then cut with scissors
Assemble with 3D foam squares
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
stamp a frame with light brown ink
gle the ovals in the middle
Add a picture from the stamps set: “Winter Friends”
I stamped my fawn with black versafine on watercolor paper
Then colored with distress ink
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Adding 2 pennants previously cut on top left
Finish by sticking lace
From the collection: “Christmas ribbon”
On the edge of the frame
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Now: the box
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
take two 12″ x 12″ kraft cardstocks
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
cut one to : 9″ x 9 1/4″
and the other to : 9 1/8″ x 9 3/8″
fold to : 1 1/4″ The 4 sides, the two cardstocks
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut the opposite corners as shown in the picture
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
With die: large frame
Of the “Fancy Label Dies 3”
Cut “notches” on two opposite sides to facilitate the opening of the box
Build and glue, to get the box and its top
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Just as we did a little earlier:
Cut 4 strips of pattern paper from: 6 5/8 “x 1 1/4”
Cut the corners with an angle of 45 °
glue on the top
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Attention: nothing is lost!
Especially pattern paper
Therefore use the triangles for stick in the inner corners of the box and its top
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Finish with the decoration of the top
Cut a 4 1/4 “x 4 1/2” Kraft cardstock
And a 4 “x 4 1/4” white cardstock
Center it on the kraft with 3D foam squares
Cut and emboss:
A large patterned paper frame with “Fancy Label Dies 3”
And an oval with white cardstock
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Between the two, add on each side, loops of red ribbon from the collection: “Christmas Ribbon”
Add under the big picture, “joy” banner from: Build A snowman stamp set
Previously stamped in dark red ink, then hot embossed with clear powder
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
Cut with scissors and stick with 3D foam squares
 Inspired by Stamping, GDT Delphine, Build A Snowman stamp set, Winter Friends Stamp set, Sugar & Spice stamp set, Christmas 3D Project, christmas card
For the final touch: add half-pearls to the corners of the white cardstock
And lace on the edge of the top
have fun! And joyful Christmas to all !!


One thought on “GDT Delphine – Christmas

Comments are closed.

%d bloggers like this: